Provisioning Storage for Aerospike on Kubernetes

To use persistent storage external to the pods, you need to set up storage classes. Storage classes are used to dynamically provision the persistent storage required by users in the Aerospike CR configuration.

The specific storage configuration depends on the environment in which you deploy your Kubernetes cluster. Each cloud provider has its own way to set up storage provisioners that dynamically create and attach storage devices to the containers.

To deploy an Aerospike cluster with persistent storage, create a storage-class.yaml file. Add the storage class configurations to this file, then use kubectl to apply these changes to the cluster.

Google Cloud

The following storage-class.yaml file uses the GCE provisioner to create a storage class called ssd.

apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
  name: ssd
provisioner: kubernetes.io/gce-pd
parameters:
  type: pd-ssd

Local volume

This example uses a local SSD (identified as /dev/nvme0n1). Attach this SSD to each Kubernetes worker node which will be used for getting the primary storage device for the Aerospike cluster deployment.

Create a Discovery Directory

Before deploying local volume provisioner, create a discovery directory on each worker node and link the block devices to be used in the discovery directory. The provisioner will discover local block volumes from this directory.

Output:

$ lsblk
NAME    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
nvme0n1       8:16   0  375G  0 disk
nvme0n2       8:32   0  375G  0 disk

Create the directory:

mkdir /mnt/disks

Link to the first block device:

sudo ln -s /dev/nvme0n1 /mnt/disks/

Link0 . to the second block device:

sudo ln -s /dev/nvme0n2 /mnt/disks/

note

You can also use your own discovery directory, but make sure that the provisioner is configured to point to the same directory.

Deploy the Local Volume Provisioner

To automate the local volume provisioning, we create and run a provisioner based on kubernetes-sigs/sig-storage-local-static-provisioner.

The provisioner runs as a DaemonSet that manages the local SSDs on each node based on a discovery directory, creates and deletes the PersistentVolumes, and cleans up the storage when it is released.

The local volume static provisioner for this example is defined in aerospike_local_volume_provisioner.yaml.

The storage class is defined in local_storage_class.yaml. This and other example CRs are stored in the main Aerospike Kubernetes Operator repository.

note

1. If the Provisioner configuration is set to shred for block cleanup, then PersistentVolume release and reclaim takes time proportionate to the size of the block device.

2. local-provisioner-config ConfigMap in aerospike_local_volume_provisioner.yaml can be changed to use blkdiscard as cleanup method if disk supports that. For more info, refer to FAQs.

   Refer to the blockCleanerCommand section in the following configuration:

    apiVersion: v1
    kind: ConfigMap
    metadata:
      name: local-provisioner-config 
      namespace: aerospike 
    data:
      useNodeNameOnly: "true"
      storageClassMap: |     
        local-ssd:
           hostDir: /mnt/disks
           mountDir:  /mnt/disks
           blockCleanerCommand:
             - "/scripts/blkdiscard.sh"
           volumeMode: Block
   caution

   When using blkdiscard you need to be sure that the drive deterministically returns zeros after TRIM (RZAT). You should check with your hardware provider or cloud provider. If you are unsure, it is safer to use dd.

3. For Openshift platforms, Local Storage Operator can be used for local provisioning.

Create a local storage class:

kubectl create -f local_storage_class.yaml

Then deploy the provisioner:

kubectl create -f aerospike_local_volume_provisioner.yaml

Verify the persistent volumes were created.

Output:

$ kubectl get pv

NAME                CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS      CLAIM   STORAGECLASS     REASON   AGE
local-pv-342b45ed   375Gi      RWO            Delete           Available           "local-ssd"            3s
local-pv-3587dbec   375Gi      RWO            Delete           Available           "local-ssd"            3s

note

The storageclass configured here is "local-ssd". We will provide this in the Aerospike cluster CR config. This storageclass will be used to talk to the provisioner and request PV resources for the cluster.