Version: Operator 3.4.0

Install the Aerospike Kubernetes Operator from OperatorHub

This procedure applies to:

note

For Kubernetes 1.23 version or later, Pod Security Admission (PSA) is enabled by default. Make sure the namespace where the Aerospike Operator is installed has either baseline or privileged Pod Security Standard level set. The restricted level is not supported by Aerospike. The default Pod Security Standard level in Kubernetes 1.23 is privileged. For more details, see Apply Pod Security Standards

1. Install the OLM and Operator

Install the Operator Lifecycle Manager (OLM) on your Kubernetes cluster with the command:

curl -sL https://github.com/operator-framework/operator-lifecycle-manager/releases/download/v0.25.0/install.sh | bash -s v0.25.0

2. Install the Aerospike Kubernetes Operator

kubectl create -f https://operatorhub.io/install/aerospike-kubernetes-operator.yaml

3. Verify the Operator is running

After installation, verify that the Operator's CSV is in the Succeeded phase.

kubectl get csv -n operators aerospike-kubernetes-operator.v3.4.0 -w

You will see output similar to the following:

NAME                                   DISPLAY                         VERSION   REPLACES   PHASE
aerospike-kubernetes-operator.v3.4.0   Aerospike Kubernetes Operator   3.4.0                Succeeded

4. Check Operator logs

AKO runs as two replicas by default, for higher availability. Run the following command to follow the logs for the AKO pods.

kubectl -n operators logs -f deployment/aerospike-operator-controller-manager manager

Output:

2023-08-01T09:07:03Z    INFO    setup   Init aerospike-server config schemas
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.3.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.2"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.6.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.2.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.4.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.7.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.7.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.1"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.6.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.2.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.4.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.3.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.2.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.3"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.5.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.3.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.3.1"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.4.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.8.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.9.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "7.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "7.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "7.2.0"}
2023-08-01T09:07:03Z    INFO    aerospikecluster-resource   Registering mutating webhook to the webhook server
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook  Registering webhook {"path": "/mutate-asdb-aerospike-com-v1-aerospikecluster"}
2023-08-01T09:07:03Z    INFO    controller-runtime.builder  skip registering a mutating webhook, object does not implement admission.Defaulter or WithDefaulter wasn't called   {"GVK": "asdb.aerospike.com/v1, Kind=AerospikeCluster"}
2023-08-01T09:07:03Z    INFO    controller-runtime.builder  Registering a validating webhook    {"GVK": "asdb.aerospike.com/v1, Kind=AerospikeCluster", "path": "/validate-asdb-aerospike-com-v1-aerospikecluster"}
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook  Registering webhook {"path": "/validate-asdb-aerospike-com-v1-aerospikecluster"}
2023-08-01T09:07:03Z    INFO    setup   Starting manager
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook.webhooks Starting webhook server
2023-08-01T09:07:03Z    INFO    Starting server {"path": "/metrics", "kind": "metrics", "addr": "127.0.0.1:8080"}
2023-08-01T09:07:03Z    INFO    controller-runtime.certwatcher  Updated current TLS certificate
2023-08-01T09:07:03Z    INFO    Starting server {"kind": "health probe", "addr": "[::]:8081"}
I0801 09:07:03.213295       1 leaderelection.go:248] attempting to acquire leader lease operators/96242fdf.aerospike.com...
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook  Serving webhook server  {"host": "", "port": 9443}
2023-08-01T09:07:03Z    INFO    controller-runtime.certwatcher  Starting certificate watcher

5. Grant permissions to the target namespaces

The Operator is installed in the operators namespace. Grant additional permission (by configuring ServiceAccounts and RoleBindings/ClusterRoleBindings) for the target Kubernetes namespace where the Aerospike clusters are created.

There are two ways to grant permission for the target namespaces:

Using kubectl
Using akoctl plugin

Using kubectl

The procedure to use the namespace aerospike is as follows:

Create the namespace

Create the Kubernetes namespace if not already created:

kubectl create namespace aerospike

Create a service account

kubectl -n aerospike create serviceaccount aerospike-operator-controller-manager

Create RoleBinding/ClusterRoleBinding for Aerospike cluster

Next, create a RoleBinding or ClusterRoleBinding as per requirement to attach this service account to ClusterRole aerospike-cluster. This ClusterRole is created as part of AKO installation and grants Aerospike cluster permission to service account.

For using Kubernetes native Pod only network to connect to Aerospike cluster create RoleBinding:

kubectl -n aerospike create rolebinding aerospike-cluster --clusterrole=aerospike-cluster --serviceaccount=aerospike:aerospike-operator-controller-manager

For connecting to Aerospike cluster from outside Kubernetes create ClusterRoleBinding:

kubectl create clusterrolebinding aerospike-cluster --clusterrole=aerospike-cluster --serviceaccount=aerospike:aerospike-operator-controller-manager

tip

For attaching multiple service accounts of different namespaces in one go, add multiple --serviceaccount params in above command

Example: To attach service accounts of aerospike and aerospike1 namespace

kubectl create clusterrolebinding aerospike-cluster --clusterrole=aerospike-cluster --serviceaccount=aerospike:aerospike-operator-controller-manager --serviceaccount=aerospike1:aerospike-operator-controller-manager

If the required ClusterRoleBinding already exists in cluster, edit it to attach new service account:

kubectl edit clusterrolebinding aerospike-cluster

This command launches an editor. Append the following lines to the subjects section:

  # A new entry for aerospike.
  # Replace aerospike with your namespace
- kind: ServiceAccount
  name: aerospike-operator-controller-manager
  namespace: aerospike

Save and ensure that the changes are applied.

Using akoctl plugin

For instructions on installing the akoctl plugin, see akoctl installation.

The procedure to use the namespace aerospike is as follows:

For using Kubernetes native Pod only network to connect to Aerospike cluster grant namespace scope permission:

kubectl akoctl auth create -n aerospike --cluster-scope=false

For connecting to Aerospike cluster from outside Kubernetes grant cluster scope permission:

kubectl akoctl auth create -n aerospike

tip

For granting permission of multiple namespaces in one go, specify comma separated namespace list in -n param

Example: To grant permission for aerospike and aerospike1 namespace

kubectl akoctl auth create -n aerospike,aerospike1

1. Install the OLM and Operator​

2. Install the Aerospike Kubernetes Operator​

3. Verify the Operator is running​

4. Check Operator logs​

5. Grant permissions to the target namespaces​

Using kubectl​

Create the namespace​

Create a service account​

Create RoleBinding/ClusterRoleBinding for Aerospike cluster​

Using akoctl plugin​