Skip to main content
We are excited to be a part of AWS re:Invent 2024. Visit us at booth #1844 in Las Vegas.More info
Loading
Version: Operator 3.3.1

Upgrade the Operator on OpenShift using Web Console to 3.3.1

note

If you are running Operator version 3.0.0, you must first upgrade through the intermediate versions:

Verify that Operator version 3.3.1 is available​

Launch the OpenShift web console. Using the Administrator view, navigate to Operators > OperatorHub. Search for Aerospike. Select the Marketplace version of the Aerospike Kubernetes Operator as shown:

A dialog appears describing the Operator as shown below. Verify that 3.3.1 is the latest version.

Upgrade the Operator​

Based on the installPlanApproval mode, the upgrade of the Operator is either:

  • Automatic: The default when installing the Operator from Red Hat Marketplace.
  • Manual: If the Operator subscription has been edited to use Manual approval.

Automatic​

The standard install procedure sets up Automatic upgrade approval for the operator. In this case OpenShift automatically installs the latest version. You do not need to perform any manual steps.

Check that the operator has been upgraded using the Administrator view, navigate to Operators > Installed Operators. Search for Aerospike.

You should see that the Operator has been upgraded to version 3.3.1 as shown below.

Skip ahead to configuring the CLI.

Manual​

If the Operator's subscription is set for Manual approval, then follow these steps to manually approve the upgrade.

In the Operator, Navigate to the Administrator view, then to Operators > Installed Operators. Search for Aerospike.

You will see that the new Operator version is available as shown below.

Click on Upgrade Available to start the upgrade. This shows the details of the InstallPlan as follows:

info

The name of the InstallPlan is automatically generated and can be different from what is shown in the following examples.

Click on Preview InstallPlan to which shows the details of the InstallPlan as follows:

Click on Approve to approve the upgrade and begin the upgrade.

The following message appears after a successful upgrade:

Select View Operator to verify the Operator details. The following details appear:

Configure the CLI​

From a terminal, log in to the OpenShift cluster and ensure that the oc and kubectl commands connect to the correct OpenShift cluster.

Check Operator Logs​

AKO runs as two replicas by default, for higher availability. Run the following command to follow the logs for the AKO pods.

kubectl -n openshift-operators logs -f deployment/aerospike-operator-controller-manager manager

Output:

2023-08-01T09:07:02Z    INFO    setup   legacy OLM < 0.17 directory is present - initializing webhook server
2023-08-01T09:07:03Z    INFO    controller-runtime.metrics  Metrics server is starting to listen    {"addr": "127.0.0.1:8080"}
2023-08-01T09:07:03Z    INFO    setup   Init aerospike-server config schemas
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.3.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.2"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.6.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.2.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.4.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.7.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.7.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.1"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.6.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.1.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.2.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.4.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "6.3.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.2.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.5.3"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.5.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "5.3.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.3.1"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.4.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.8.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "4.9.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "7.0.0"}
2023-08-01T09:07:03Z    DEBUG   schema-map  Config schema added {"version": "7.1.0"}
2023-08-01T09:07:03Z    INFO    aerospikecluster-resource   Registering mutating webhook to the webhook server
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook  Registering webhook {"path": "/mutate-asdb-aerospike-com-v1-aerospikecluster"}
2023-08-01T09:07:03Z    INFO    controller-runtime.builder  skip registering a mutating webhook, object does not implement admission.Defaulter or WithDefaulter wasn't called   {"GVK": "asdb.aerospike.com/v1, Kind=AerospikeCluster"}
2023-08-01T09:07:03Z    INFO    controller-runtime.builder  Registering a validating webhook    {"GVK": "asdb.aerospike.com/v1, Kind=AerospikeCluster", "path": "/validate-asdb-aerospike-com-v1-aerospikecluster"}
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook  Registering webhook {"path": "/validate-asdb-aerospike-com-v1-aerospikecluster"}
2023-08-01T09:07:03Z    INFO    setup   Starting manager
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook.webhooks Starting webhook server
2023-08-01T09:07:03Z    INFO    Starting server {"path": "/metrics", "kind": "metrics", "addr": "127.0.0.1:8080"}
2023-08-01T09:07:03Z    INFO    controller-runtime.certwatcher  Updated current TLS certificate
2023-08-01T09:07:03Z    INFO    Starting server {"kind": "health probe", "addr": "[::]:8081"}
I0801 09:07:03.213295       1 leaderelection.go:248] attempting to acquire leader lease operators/96242fdf.aerospike.com...
2023-08-01T09:07:03Z    INFO    controller-runtime.webhook  Serving webhook server  {"host": "", "port": 9443}
2023-08-01T09:07:03Z    INFO    controller-runtime.certwatcher  Starting certificate watcher
Last updated on